Instruction manual DR2815N BEL VAPOR
dcg16.it
18
4 Take suitable clean water with the measuring cup, and add the
water into the tank. (Max. capacity of the tank is 350ml. Do not
overfill the tank and some space must be left in the tank). Re-install
the safety cap and tighten it in position
5 Check the power supply and socket, and confirm they comply
with the requirements given in the user manual, then connect the
power supply.
6 Indicator lamp will turn off in 3 minutes after connect the power
supply, it means steam is ready. At this time put forward the safety
switch on the steam button then lightly press the steam button
and check whether steam is sprayed out of the nozzle. (Do not aim
the spray nozzle at any animal, person or electrical products).
7 If there is steam sprayed out, release steam button and installs
suitable accessories according to your needs, then press down the
steam button again in order to carry out the operations required
by you.
8 When finish the cleaning job or stop the machine to do some other
things, raise the steam button, then safety switch will takes effort.
Installation of Accessories
1. Install the spray cup with hairbrush
Hold the pipe section of the spray cup with hairbrush in your hand,
align the arrow on the spray cup with the single-line mark on short
spray nozzle on the machine body, and insert the spray cup in
position. Rotate the spray cup in clockwise direction, and align
the arrow on the spray cup with the double-line mark on short
spray nozzle on the machine body, as shown in Figure 1. Fix the
spray cup on the machine body. To remove the spray cup with
hairbrush, please rotate the spray cup inversely (counterclockwise)
