Instruction manual 13 BLADES STAND FAN WITH TIMER AND REMOTE CONTROL
dcg16.it
11
set speed will flash several times and then the display will return to
indicate the current room temperature and will gradually change
as the room temperature changes.
3. Press TIMER button to activate timer, the time can be set from 1
to 12 hours. The display will indicate the corresponding set time.
The fan will stop automatically after the set time has expired. The
set time will flash several times and then the display will return to
indicate the current room temperature and will gradually change
as the room temperature changes.
4. Press MODE button will cycle the fan through different patterns of
wind modes.
NORMAL wind (P1):
The fan is operating at the selected fan
speed(HIGH, MID, LOW).
NATURAL wind (P2 ):
The fan is simulating a natural wind by
cycling through all the speeds.
SLEEP wind (P3):
The fan speed will decrease by one level per
half hour and then continue to run at low speed, ideal for resting.
• If it is selected HIGH, the unit will work under HIGH NORMAL
wind mode for half an hour, then revert to work under MID
NORMAL wind mode for half an hour and then revert to LOW
NORMAL wind mode.
• If it is selected MID, the unit will work under MID NORMAL wind
mode for half an hour and then revert to LOW NORMAL wind
mode.
• If it is selected LOW, the unit will work under LOW NORMAL
wind mode.
5. Press SWING button to activate the oscillation function for
widespread air distribution.
Press again to stop the oscillation function.
6. Press ON/OFF button once again to turn the fan off.
7. Always unplug the fan from the power socket when not in use or if
it will be left unattended.
