Instruction manual VE1632TT STAND FAN 18 INCHES
dcg16.it
11
ASSEMBLE OF BLADE AND GRILLE
• Unscrew the plastic mounting nut from the front of the motor
housing by rotating it anticlockwise.
• Position the rear grille against the front of the motor housing with
the handle uppermost, ensuing that the locating pegs on the motor
housing are engaged correctly in the holes of the rear grille.
• Tighten the Rear Grille Mounting Nut clockwise.
DO NOT
OVERTIGHTEN IT.
• Push the fan blade onto the motor shaft, locating the slot at the
back of the blade on the drive pin that passes through the motor
shaft.
• Tighten the blade cap by turning it anticlockwise.
• Position the front grille against the rear grille so that the holes in
the rims that accept the small nut and bolt are in line. Insert the
bolt through the holes and screw on the nut. Do not fully tighten at
the stage.
• Push the grille retaining clips into position ensuring that they
engage correctly on the rim of the grille.
• Fully tighten the small nut and bolt that passes through the rim of
the grille.
