The
SE-6600
Front Page screen should appear as in Figure 2:
Figure 2 – SE-6600 Front Page Screen
4:
Click on
Cipher Config
from the menu. Select the radio button for “
Block Mode Clear
” and
enter a Passphrase (e.g. “abc123”), as shown in Figure 3 below.
Figure 3 – SE-6600
Cipher Config
Screen, Showing Entries Prior to
Save
To make these changes active on SE-6600 A, click the
Save
button. A
Server Status Message
screen will appear to notify of the saved changes.
Note: The passphrase will no longer display,
but it has been saved.
5:
Disconnect the LAN cable from SE-6600 A. In a command terminal on the PC (run as
Administrator), clear the ARP cache entry for 192.168.1.1 by using
the command
arp -d
192.168.1.1
. (Alternatively, PC B's LAN connection could be used to configure the second SE-
6600, as long as its IP address is set to the same LAN subnet described in Step 2.)
2
