OPERATION
•
REMOVE ALL DEBRIS FROM THE ITEMS TO BE WASHED, BEFORE PLACING THEM INTO THE BASKET.
•
SELECT THE WASHING
CYCLE TIME SWITCH -
1` 2` OR 3` MINUTE.
•
CLOSE DOWN THE HOOD, THE WASHING CYCLE WILL START AUTOMATICALLY AND THE
CYCLE LAMP
WILL COME ON.
•
AT THE END OF THE
CYCLE THE
CYCLE LAMP
WILL GO OUT.
•
ALLOW A FEW SECONDS FOR THE WATER TO RETURN TO THE WASH TANK BEFORE LIFTING UP THE HOOD.
•
SLIDE OUT THE BASKET AND ALLOW EXCESS WATER TO RUN OFF BEFORE REMOVING.
PREPARATION
•
CHECK
DRAIN PLUG
IS
PUSHED
FIRMLY IN PLACE AND
FILTER
AND
SURFACE FILTER
ARE CORRECTLY POSITIONED.
•
CHECK
DETERGENT
( RED ) AND
RINSE AID
( CLEAR ) SUPPLY TUBES, WITH
FOOT VALVES
- ARE
SUBMERGED IN SUFFICIENT PRODUCT.
•
CHECK THE HOOD IS CLOSED DOWN AND PRESS THE
POWER
SWITCH
- THE POWER GREEN LAMP WILL COME ON.
•
ALLOW 35 MINUTES FOR THE MACHINE TO REACH THE CORRECT WASHING TEMPERATURE.
OPERATING AND MAINTENANCE INSTRUCTIONS
DC1300
ROUTINE MAINTENANCE
•
AT THE END OF A SESSION TURN OFF THE
POWER SWITCH
,
COLLECT THE DEBRIS INTO THE
FILTER BOX
AND REMOVE.
•
REMOVE THE
SURFACE FILTER
AND CLEAN THOROUGHLY.
•
DO NOT ALLOW DEBRIS TO GO DOWN INTO THE LOWER WASH TANK.
•
REMOVE THE
DRAIN PLUG
- THE WASH TANK WILL EMPTY.
•
IF YOUR MACHINE IS FITTED WITH A WASTE PUMP - TURN OFF THE
POWER SWITCH
AND
REMOVE THE
DRAIN PLUG
- THEN PRESS AND HOLD THE
WASTE PUMP SWITCH
UNTIL THE WASH TANK IS EMPTY.
•
DO NOT REMOVE
LOWER WASH TANK FILTER
OR
(
IF FITTED
WASTE PUMP FILTER BOX -
OPTIONAL ) AT THIS STAGE.
•
CLEAN AROUND THE LOWER WASH TANK AND INSIDE THE HOOD WITH AN 'ADDIS'’ TYPE WASHING UP BRUSH.
•
DO NOT ALLOW DEBRIS TO GO DOWN THE
OUTLET HOLE
AS THIS MAY DAMAGE YOUR MACHINE.
•
THOROUGHLY CLEAN AND REPLACE THE
LOWER WASH TANK FILTER
- REPLACE THE
SURFACE FILTER
&
FILTER BOX
.
•
REGULARLY CHECK
RINSE JETS
AND
WASH JETS
ARE CLEAR OF DEBRIS OR LIME SCALE - REMOVE IF NECESSARY BY
UNSCREWING THE
RINSE ARM NUT
- REMOVE WASH ARM
CLEANING CAPS
- CLEAN THOROUGHLY AND REASSEMBLE.
•
YOUR WATER SOFTENER ( IF FITTED ) SHOULD BE REGENERATED ONCE A WEEK OR ACCORDING TO INSTRUCTIONS.
SERVICE TEL.
directcateringproducts.co.uk
SERVICE CALLS TO RECTIFY FAULTS CAUSED BY `THE LACK OF ROUTINE MAINTENANCE` WILL BE CHARGED FOR
AND YOUR WARRANTY MAY BE AFFECTED
SWITCH LAMP 1` 2` OR 3` MINUTE WASTE PUMP SWITCH TEMPERATURE DISPLAY TEMPERATURE DISPLAY
POWER CYCLE CYCLE TIME SWITCH (OPTIONAL) WASH TANK BOILER
RINSE ARM NUT
RINSE JETS
WASH JETS
CLEANING CAP
FOOT VALVES
SURFACE FILTER
LOWER WASH TANK FILTER
OUTLET HOLE
DRAIN PLUG
FILTER BOX
(OPTIONAL)
WASTE PUMP
FILTER BOX
