DC Matic TL-900 User Manual Download Page 5

Fig. 5 

Properly Controlling Output Impacting Torque 

 

DC-Matic Enterprises, Inc. markets (4) individual 3/4 inch drive “torque limiting  
extensions”  calibrated  at  175,  250,  350  and  475  foot  pounds.  When  attached  to  the 

Model  TL-900 

a  burst  of  (2)  seconds  of  tool  run  time  will  yield  an  output  (impacting 

torque) limited within the range (plus or minus 10 %) that is marked on the extension. It 
must be noted that a longer than (2) second burst will yield a greater amount of  
impacting torque. 

WARNING 

 

Excluding the do-it-yourself replacement of motor  

 

brushes, please 

DO NOT 

attempt to repair your 

Model TL-900.

  

 

Doing so will void the tool’s WARRANTY. 

Fig. 6 

475 Foot Pound  
Torque Limiting Extension 

By removing the (4) allen-head cap screws 
that secure the hammer assembly to the 
tool, the stabilizing handle can be moved 
to the other side as shown. 

Stabilizing Handle Placement 

www.dcmatic.com 

Reviews: