17.
Load New Preset
Press Select to Load
˘New Preset
At this point you are ready to load your new
preset. Press in on the Data Wheel to load
this new preset.
Press the Data Wheel. “Loading”
will appear in the display, and you
will move on to the Auto-Level
Wizard.
18.
AUTO-LEVEL
Connect RTA Mic to:
RTA MIC INPUT
<NEXT PG> to advance
18A - Connect the
RTA-M mic here.
18B - Press the NEXT PG button.
NOTE:
This Auto-Level feature requires that signal be present from both High outputs of the DriveRack! If
you are not using both of these outputs, don’t have the RTA mic, or do not want to use this feature, you can
skip this step by pressing the PRESET button. If you would still like to Auto EQ the system, press and hold
the Auto EQ button for 5 seconds then proceed to step 25
.
19.
HIGH OUTPUTS
Verify amp
levels as shown
56% Level
19A - Make sure your High Amp level matches the
level shown in the display.
19B - Press the NEXT PG button.
20.
LOW OUTPUTS
Verify amp
levels as shown
53% Level
20A - Make sure your Low Amp level matches the
level shown in the display.
20B - Press the NEXT PG button.
