dbx 286A, Owner'S Operation Manual

Page: 15 / 68

Mic Preamp/
Processor
286A
®
The 286A is an all-solid-state product with components chosen for high performance
and excellent reliability. Each 286A is tested, burned in and calibrated at the factory
and should require no internal adjustment of any type throughout the life of the unit.
We recommend that your 286A be returned to the factory only after referring to the
manual and consulting with Customer Service.
Our phone number, fax number and address are listed on the back cover of this man-
ual. When you contact dbx Customer Service, be prepared to accurately describe the
problem. Know the serial number of your unit -- this is printed on a sticker attached
to the rear panel.
Note: Please refer to the terms of your Limited Two-Year Standard Warranty, which extends to the first end-
user. After expiration of the warranty, a reasonable charge will be made for parts, labor, and packing if you
choose to use the factory service facility. In all cases, you are responsible for transportation charges to the
factory. dbx will pay return shipping if the unit still under warranty.
Shipping Instructions: Use the original packing material if it is available. Mark the
package with the name of the shipper, and with these words in red: DELICATE
INSTRUMENT, FRAGILE! Insure the package properly. Ship prepaid, not collect.
Do not ship parcel post.
We appreciate your feedback. After you have an opportunity to use your new 286A,
please complete the Registration Card and return it.
This warranty is valid only for the original purchaser and only in the United States.
1. The warranty registration card that accompanies this product must be mailed with-
in 30 days after purchase date to validate this warranty. Proof-of-purchase is con-
sidered to be the burden of the consumer.
2. dbx warrants this product, when bought and used solely within the U.S., to be free
from defects in materials and workmanship under normal use and service.
3. dbx liability under this warranty is limited to repairing or, at our discretion, replac-
ing defective materials that show evidence of defect, provided the product is
returned to dbx WITH RETURN AUTHORIZATION from the factory, where all
parts and labor will be covered up to a period of two years. A Return Authorization
number must be obtained from dbx by telephone. The company shall not be liable
for any consequential damage as a result of the product's use in any circuit or
assembly.
4. dbx reserves the right to make changes in design or make additions to or improve-
ments upon this product without incurring any obligation to install the same addi-
tions or improvements on products previously manufactured.
5. The foregoing is in lieu of all other warranties, expressed or implied, and dbx nei-
ther assumes nor authorizes any person to assume on its behalf any obligation or
liability in connection with the sale of this product. In no event shall dbx or its
dealers be liable for special or consequential damages or from any delay in the per-
formance of this warranty due to causes beyond their control.
13
T
ECHNICAL
S
UPPORT
A
ND
F
ACTORY
S
ERVICE
R
EGISTRATION
C
ARD AND
U
SER
F
EEDBACK
W
ARRANTY