www.dbtechnologies.com
SUB 915 420120322Q REV 1.0
Thank you for choosing a dBTechnologies Product!
Sub 915 is an active subwoofer, equipped with one 15” transducer (4” voice coil). It allows a deep configuration with
different parameter controls (polarity, delay, xover/link frequency selection). It can be remote controlled, using
Aurora Net software, thanks to the RDNet section on the amplifier panel.
Check the site
www.dbtechnologies.com
for the complete user manual!
1) Unpacking
The box contains:
No. 1 SUB 915
No. 1 Mains cable with Neutrik
® powerCON TRUE1
connector
No. 1 Fuse for 100-120V~ usage
This quick start and warranty documentation
2) Easy installation
The easy use in different configurations is guaranteed
by:
•
handles
[
A
],
•
pole mount adapters [B]
•
amplifier [C]
A usage example is represented here following, for
information only. Please refer to the accessories
instructions and SUB 915 complete manual for further
information.
The product and accessories must be handled
by trained personnel only!
The user is
required to follow regulations and mandatory
laws on safety of the country in which the product is
used.
Don’t use handles to suspend SUB 915!
Example of use with IG2T on pole
