15
Note: For the first time usage, turn on both units, the
Baby unit and Parent unit can automatically scan the
corresponding code at once without press any Button.
If no connection can be established, the Parent unit
alert with “Bi-Bi” sound and displays
flashes.
To test your audio monitor:
1. Place the Parent unit and Baby unit in room where you intent to use it.
2. Connect the Parent unit and Baby unit with the AC adaptor until the LCD
display lights up.
3. The Baby unit and Parent unit will connect automatically.
What to do if no link is established:
1. Restart the Parent unit and Baby Unit by pressing the volume Button “▼”
and POWER ON/OFF Button “
” for 2 seconds at the same time. The “Bi---”
sound will be heard after successful code pairing.
2. If the Parent unit is out of range, place it closer to the Baby unit, but not
closer than 1 meter/3.5 feet.
3. If the Baby or Parent unit is too close to another 2.4GHz appliance, switch
off this appliance or move the unit away from this appliance.
4. If the Baby unit is switched off, switch it on.
Operating range
1.The operating range is 330 meters/1000 feet outdoors and up to 50
meters/150 feet indoors.
2.The operating range of the Baby monitor varies depending on the
surroundings and factors that cause interference. Wet and moist materials
cause so much interference that the range loss is up to 100%.
