WARNING:
This product is part of a personal fall arrest system
1
. The user must read and follow the
manufacturer’s instructions for each component or part of the complete system. These instructions must be
provided to the user of this equipment. The user must read and understand these instructions or have them
explained to them before using this equipment. Manufacturer’s instructions must be followed for proper use and
maintenance of this product. Alterations or misuse of this product or failure to follow instructions may result in
serious injury or death.
1
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application,
contact Capital Safety.
IMPORTANT:
Record the product identi
fi
cation information from the ID label in the Inspection and Maintenance
Log in Section 9 of this manual.
DESCRIPTION:
Sealed-Blok™ Self Retracting Lifelines (SRLs) provide fall protection and worker mobility in a sealed enclosure
designed to keep critical components free of dirt, grease, water and chemicals. See Figure 1 for available
Sealed-Blok™ SRL models and features.
Figure 1 - Sealed-Blok™ Self Retracting Lifelines
A Anchorage Handle
B Instruction Label
C Housing
D ID Label
E Cable Guide
F
Lifeline
G Bumper
H Self Locking Snap Hook
Sealed-Blok™SRL
MODEL DESCRIPTIONS:
See inside back cover for model descriptions. Model numbers ending with “C” designate CSA certi
fi
ed models
1 Fall Arrest System:
A system that prevents the worker from colliding with an obstruction or lower level by arresting a fall.
© Copyright 2011, DB Industries, Inc.
Sealed-Blok™
Self Retracting Lifelines
Model Numbers:
(See inside back cover.)
USER INSTRUCTION MANUAL
SEALED-BLOK™ SELF RETRACTING LIFELINES
This manual is intended to meet the Manufacturer’s Instructions as required by ANSI Z359.1 and The Canadian
Standards Association (CSA), and should be used as part of an employee training program as required by OSHA.
Form: 5903059 Rev: B
B
A
G
C
H
E
F
D
netzerotools.com
