DBI SALA Flexiguard 8530595, User Instruction Manual

Page: 12 / 16

Table 2 – Inspection and Maintenance Log
Inspection Date: Inspected By:
Components: Inspection:
(See Section 1 for Inspection Frequency )
User
Competent
Person
Boom and Vertical
Mast (Figure 2)
Inspect the Boom (A) and Vertical Mast (D) for structural defects or damage
including bends, corrosion, etc.
Inspect all system fasteners to ensure they are tight.
Periodically apply grease to the Grease Zerk (located at the bottom of the
Vertical Mast to lubricate the internal Hitch Ball Pivot.
Anchorage
Connection Points
Make sure anchorage connection is free of corrosion, cracks, or other
imperfections that may cause malfunction during operation.
Labels Verify that all labels are securely attached and are legible (see ‘Labels’ )
PFAS and Other
Equipment
Additional Personal Fall Arrest System (PFAS) equipment, winches, etc. that
are used with the Flexiguard SafRig Fall Arrest System should be installed and
inspected per the manufacturer’s instructions.
Outrigger Base
(Models 8530579
and 8530607)
Ensure that the outriggers are not bent or cracked and that all hardware is
present and securely tightened.
Serial Number(s): Date Purchased:
Model Number: Date of First Use:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date:
Corrective Action/Maintenance: Approved By:
Date: