9
Figure 5 - Safe Work Radius
6 Ft (2m) maximum safe
work radius from anchor
point
MAXIMUM 10 ft
(3 m) SRL
3 Ft (1m)
maximum safe
work radius from
the leading edge
of the platform
WARNING:
Do not work outside of outrigger “footprint.” Loss of stability
of the Free Standing Portable Access Ladder System could result.
6 Ft (2m) maximum safe
work radius from anchor point
MAXIMUM 10 ft (3 m) SRL
Optional
Scissor Jack
Step 3. Adjust ladder height 6 in. to 12 in. (150-300 mm) above the work area by
cranking the winch crank handle in a clockwise direction.
Step 4. Insert the 5/8 in. diameter Locking Pin into the ladder locking mechanism tube
to the first, closest hole to prevent accidental ladder movement.
Step 5. Push the unit to position the platform 6 in. to 12 in. (150-300 mm) away from
the work area/object for safe access. Wheels and jacks must be positioned
over a stable, level surface, or leveled with blocks.
Step 6. Extend the outriggers to maximum length, rotate jacks down and apply
approximate pressure of 3 to 5 revolutions after initial contact with surface.
Repeat for all four outside jacks. Optional Scissors Jack setup will not require
rotation.
Step 7. Rotate inner jacks down and apply light pressure by just contacting the
surface.
Step 8. You will need a tag line to access the self retracting lifeline (SRL) attached to
the Overhead Anchor Point Post.
