DBA LaneWalker Model C Operating Manual
·
Page 27
8. System Control Lino Duster
This series of screens will be used to adjust the duster unwind time. It is also
possible to change the default number of lanes that a new roll of cloth will dust.
Depress the
MENU
key until the following screen appears:
* SYSTEM CONTROL
LINO DUSTER
Depress the
ENTER
and then the
NEXT
key. The following screen will appear:
PRESENT DUSTER
09 UNWND TIME 09
This screen will display the current unwind time setting for each “ratchet” of cloth.
This number will automatically increase as the size of the supply cloth roll decreases. This
value will return to the default setting when a new roll of cloth is installed and the cloth
counter is reset. NO CHANGES SHOULD BE NEEDED IN THIS MENU.
Depress the
ENTER
and then the
NEXT
key. The following screen will appear:
DEFAULT DUSTER
09 UNWND TIME 09
This screen will display the default time for the unwinding of duster cloth. This is the
unwind time for the cloth when a new roll of cloth is installed and the duster counter is
reset. If the value is increased more cloth will be unwound. If the value is decreased less
cloth will be unwound. Changes can be made to this number by using the UP or DOWN
ARROWS.
Depress the
ENTER
and then the
NEXT
key. The following screen will appear:
LINO EMPTY # LNS
0600 DEFAULT0600
This screen displays the default number of lanes that a new roll of cloth will
complete. When the duster counter is reset, after installing a new roll of cloth, this is the
value that will be displayed. If changes have been made to the default unwind time, this
value may need to be changed. Use the UP or DOWN ARROWS to change the value.
When the correct value is displayed press
ENTER
.
This concludes the selections within the SYSTEM CONTROL LINO DUSTER menu.
