1 TO ADJUST FREQUENCY, CAREFULLY FOLLOW THESE STEPS
1. Re-open the case of the REMOCON. Replace Jumper 1(Learn Mode).
2. Identify the frequency tuning capacitor (FTC). Refer to diagram.
3. Place the remotes together. Press and hold down a matching button on each remote using fingers from one hand. Now
part your fingers so as to increase the distance between the remotes to the point where the REMOCON light becomes
weakest. Using the tuning tool provided, turn the REMOCON very slowly clockwise and counterclockwise until the light glows
brightest.
4. Replace Jumper 1 and test. If remotes still did not work, try another Freq. Range by changing configuration of Jumper 2 &
3. 5. Once successful, operating range can be maximized by moving to the furthest distance where the REMOCON functions.
Take two steps backwards and minutely adjust the FTC until the alarm arms again. Repeat this procedure until maximum
range is achieved.
6. Replace the case and screw closed. Do not over tighten. The procedure is now complete.
Summary of Contents for RMC-166H
