VIO X310
420120424Q REV1.0
QUICK START USER MANUAL SECTION 1
4
IMPORTANT SAFETY INSTRUCIONS
1.Read these instructions
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use
caution, when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
•
No naked flame sources, such as lighted candles, should be placed on the apparatus
•
Do not use the apparatus in tropical climates
WARNINGS!
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects, make sure that
the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product.
For safe use, periodically check that all parts are in good working condition before use. Only authorised personnel may carry out design,
calculations, installation, testing and maintenance of professional flown or stacked audio systems. AEB Industriale shall not be liable for
improper installation carried out without adequate safety measures.
Never suspend the speakers from the handles! Only use the accessories and configurations described in this manual, and proceed in
accordance with the instructions given in the manuals for the accessories.
Do not obstruct the amplifier cooling fins at the back. In the event of overheating, the audio volume is gradually reduced until the
module is thermally stable. The level is automatically restored on reaching the correct operating temperature.
Do not attempt to open the amplifier.
In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and contact an authorised service centre.
Only use the power cable provided.
The USB SERVICE DATA connection is to be used exclusively for updating the product’s firmware; do not connect any other USB device to
the unit to avoid the risk of damage and malfunction.
Do not use the monitor for a prolonged period with the limiter LED steadily lit or flashing as this indicates operation under stress with
excessive distortion.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should
never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation,
installation, testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualified and au
-
thorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel. +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
Scan with your
QR Reader App
to download the
complete User
Manual.
Q
QRRCCooddee tteexxtt
https://www.dbtechnologies.com/qrcode/001089/
D
Daattee ccrreeaatteedd
15-06-2021 11:03 13
D
Deessccrriippttiioonn
product name: VIO X310
IDnode: 7327
IDlanguage: 267
language: English
field: manual
