www.dbtechnologies.com
SUB 612
Rev 1.1 cod. 420120266Q
3) Connections and controls
All the connections and controls are in the amplifier
panel side:
1
– Balanced XLR inputs
2
– Balanced XLR outputs
3
– Subwoofer level rotary
4
– Outputs Mode (Link or Xover mode)
5
– Subwoofer Setup (Polarity switch) and
Subwoofer Mode button (Flat/Boosted)
6
– LEDs (Limiter, Signal / ON)
7
– Mains input connector
8
– Power switch (ON, OFF)
a) Once you have properly set up the desired
configuration (see also the complete user manual and
accessories instructions for further information),
connect the audio input (mono) or inputs (stereo) (
1
).
Connect the output (mono) or outputs (stereo) (
2
) and
consequently set the Subwoofer level to 0 dB in the
right position (
3
).
b) Set properly the Outputs Mode (
4
): “Link” in case of
direct link connection, “Xover” for example in case of
use with a OPERA or B-HYPE series model.
c) Choose the Subwoofer Polarity (Normal or Reverse)
(
5
) to obtain the proper behavior. It is possible to add
a low-frequencies boost (
5
) with the related Subwoofer
Mode switch.
d) Connect the VDE cable to the related connector (
7
).
Then turn ON the power switch (
8
). The, the
“Signal/ON” LED (
6
) turns on, signaling the proper
power connection, and starts blinking at the presence
of audio signal (greater than -20 dBu).
Check the complete user manual on
www.dbtechnologies.com
for further information about the system and available
accessories.
Scarica il manuale completo da
www.dbtechnologies.com
per
ogni ulteriore informazione sul sistema e sugli accessori
disponibili.
Für weitere Informationen und verfügbares Zubehör lesen sie
bitte
die
vollständige
Bedienungsanleitung
unter
www.dbtechnologies.com.
Vérifiez
le
manuel
de
l'utilisateur
complet
sur
www.dbtechnologies.com
pour
des
informations
complémentaires du système et des accessoires disponibles.
Compruebe
el
manual
de
usuario
completo
sobre
www.dbtechnologies.com
para la información adicional sobre el
sistema y accesorios disponibles.