dB Technologies Ready 4, User Manual

Page: 28 / 100

27
ENGLISH
DESCRIPTION
READY 4
is a two-way bi-amplified speaker, designed for mobile use, which doesn't need to be connected
to the mains.
The
READY 4
speaker is equipped with the modern digital amplifier DIGPRO® G2, which can deliver a power
of 200W.
The DIGPRO® G2 amplifiers use power supplies which are based on the SMPS (Switched-Mode Power
Supply) technology. Thanks to its low power dissipation, the amplifier module can be cooled passively,
without the help of any fan.
READY 4
can be powered: by the built-in 12V lead battery, by the mains (220V or 110V AC) or by a 15Vdc
adapter (not included). This provides great versatility and allows the speaker to be used under any
condition.
The lead battery can be easily replaced if depleted. The rear panel allows to quickly replace it, thus
prolonging the operating time of the
READY 4
speaker when not connected to the mains.
On battery power, you can use the speaker near ponds and found that in the case of accidental tipping the
speaker READY4 not come into contact with water or liquids in general.
The digital pre-amplifier with DSP (Digital Signal Processing) manages all the sound parameters. Some
parameters can be accessed by the user (Volume, Eq, etc), while other ones are factory set (crossover freq.,
phase management etc).
Using the keys located under the OLED display you can check the speaker status and enable the different
functions.
The
READY 4
speaker is equipped with a radio receiver device, allowing to establish a connection with
wireless transmitter radio microphones, which are sold separately.
The pre-amplifier module is ready for the installation of a Bluetooth interface (sold separately), allowing to
establish a connection with devices which support the same technology, like phones, PCs, etc.
READY 4
is made of high-resistance plastic material and is equipped with a top handle for easier carrying.
The lower section of the box is equipped with a standard stand support (diam.36mm).
Compatible accessories:
Model code Name Description
MBT-1 Bluetooth interface Additional Bluetooth module
Ready 4-860M Radio microphone
Compatible ISM (863-865MHz) band
radio transmitter (Hand-held
microphone)
Ready 4-860P Pocket
Compatible ISM (863-865MHz) band
radio transmitter (belt)
HMB100S Black headset
Headset microphone (spectacle-like
frame) with condenser cardioid
capsule, Black, with 3.5 stereo jack.
HMS200S Skin headset
Headset microphone (single ear) with
condenser cardioid capsule, flesh tone,
with 3.5 stereo jack. Waterproof.