www.dbtechnologies.com
INGENIA IG3T
Rev 1.1 cod. 420120239Q
Thank you for choosing a dBTechnologies Product!
INGENIA IG3T is a powerful 2-way vertical speaker, equipped with one 1.4” compression driver with a 3” voice coil
and two 10” woofers, in an innovative shape. The horn of the driver is vertically asymmetrical, for a precise acoustical
coverage in different kind of installations, indoor and outdoor. The powerful DIGIPRO
®
G3 amplifier section, capable
of handling up to 900 W (RMS power), is controlled by a DSP, which can perform a detailed customization of the
output sound of the speaker. In particular, the DSP can recognize if 2 INGENIA IG3Ts are installed together, stacked
or flown, through the special IR communication handles, and can perform a digital steering, making them sound as
one single source with a selectable inclination. All the DSP parameters can be viewed and selected in the user-
friendly interface, equipped with a self-rotating OLED display, and can be saved and reloaded in different custom
settings by the user, who can protect his choices with a password.
Check the site
www.dbtechnologies.com
for the complete user manual!
1) Unpacking
The box contains:
N°1 INGENIA IG3T
N°1 Mains cable with
Neutrik® powerCON TRUE
connector
N°1 100-120 V FUSE
This quick start and warranty documentation.
2) Easy Assembly
The speaker can be configured in 5 main modes:
Option 1: Single Mode (1 speaker mounted on an
optional pole stand)
The speaker is equipped with a standard pole-
mounting hole, so it can be mounted on a D35 mm
optional pole stand (tripod). For a safe installation, it
is not admitted a 2-speakers mounting, and the user
must check the stability of the system. The maximum
admitted height is 120 cm (47.25 inch.).
Option 2: Stacked on a subwoofer (1 or 2 speakers)
The speaker can be mounted on a subwoofer with D35
pole mounting hole, using a GSA-IG optional adapter.
It is mandatory to use an additional fastening system.
Option 3: On the floor (1 or 2 speakers)
The speaker can be mounted on the floor, only using a
GSA-IG optional adapter. In this case it is mandatory to
use an additional fastening system or straps.
Option 4: Pole-mounted on a subwoofer (1 speaker)
Only one speaker can be installed on a D35 pole
(maximum height: 120 cm – 47.25 in.), mounted on a
subwoofer. It is mandatory to use an additional
fastening system to secure properly the installation.
Option 5: Flown (1 or 2 speakers)
The speaker can be mounted flown, using the optional
DRK-IG fly bar and TGA-IG truss adapter.
In a 2-speakers configuration, it is mandatory to use a
couple of LP-IG optional link brackets to mount them
together
. /
Other kinds of installation not illustrated in
this manual are not admitted. /Don’t cover the handles in
any way, they are equipped with infrared ports!
3) Connections and OLED Display
The INGENIA speakers are equipped with an intuitive
OLED display. All the connections are in the amplifier
panel side:
1 – Peak led.
2 – OLED Display.
3 – Push rotary encoder (rotate: select, push: confirm).
4 – Mini B-type USB port (for firmware updating).
5 – Link audio output.
6 – Combo line/mic input.
7 – Input sense switch (LINE/MIC).
Single Mode
(only 1 IG3T
)
Stacked on
a subwoofer
(1 or 2 IG3T)
Flown
(1 or 2 IG3T)
On the floor
(1 or 2 IG3T)
Pole-
mounted on
a subwoofer
(only 1 IG3T)