DB Drive WDX G1 Series, User Manual

Page: 5 / 8

RECOMMENDED ENCLOSURES
Vented Sealed
WDX6.5G1.4 WDX8G1.4 WDX10G1.4 WDX12G1.4 WDX15G1.4 ENCLOSURES:
Woofer Cut-out:
Mounting Depth:
Sealed Box: 0.33 cuft.
(9.34 L)
Vented Box: 0.64 cuft.
(18.12 L)
• Vent Area:
• Vent Length:
9 in.
(22.86 cm)
• Tuning:
38Hz
Dynamic Power : 600 Watts
Nominal Power : 300 Watts
3.14 sq in.
(20.27 cm2)
0.6 cu ft.
(16.99 L)
0.9 cuft.
(25.49 L)
14.7 in.
(37.33cm)
38Hz
1200 Watts
600 Watts
7.7 sq in.
(45.6 cm2)
1 cu.ft.
(28.32L)
1.2 cu.ft.
(33.98 L)
11 in.
(27.94 cm)
36Hz
2000 Watts
1000 Watts
7.7 sq in.
(45.6 cm2)
2.0 cu.ft.
(56.63L)
2.7 cu.ft.
(76.45L)
12 in.
(30.48 cm)
39Hz
2000 Watts
1000 Watts
30 sq in.
(193.55 cm2)
3.0 cu.ft.
(84.95L)
3.4 cu.ft.
(96.27L)
18 in.
(45.72 cm)
39Hz
2000 Watts
1000 Watts
40 sq in.
(258.06cm2)
CALCULATING ENCLOSURES
Calculating External Volume
To calculate box volume, measure the outside Width x Height x Depth of
the enclosure. Example 12” x 14” x 9”=1512 ÷ 1728” Cubic feet.
Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inches total by 1728”. Example 1512 ÷ 1728=.875 Cubic feet.
Calculating Internal Volume
To calculate the internal (net) volume of the above box you must first multiply
the thickness of the wood you are using by Two(2). Example 3/4” x 2= 1.5“
Next subtract 1.5 from each of the outside measurements of the box.
Width Height Depth
12 - 1.5 = 10.5 14 - 1.5 = 12.5 9 - 1.5 = 7.5
Multiple the new totals (H x W x D) Example: 10.5 x 12.5 x 7.5 = .5696
Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inch total by 1728”. Example 984.375 ÷ 1728=.5696 cubic feet.
It is recommended to build your enclosure from at least 3/ 4” thick MDF (medium density fiber
board). Make sure the enclosure is sealed airtight.
4.60 in.
(116.84 mm)
5.33 in.
(135.38 mm)
6.15 in.
(156.21 mm)
6.84 in.
(173.73 mm)
7.94 in.
(201.67 mm)
5.94 in.
(151 mm)
7.20 in.
(182.88 mm)
9.15 in.
(232.41 mm)
11.07 in.
(281.17 mm)
13.77 in.
(349.76 mm)