Dazzle Digital Video Creator 100 User’s Guide • Outputting Video • Page 18
Outputting Video
This section explains how to set up the DVC 100 for analog video output, so you can
transfer your edited video to a camcorder or VCR to create customized video tapes.
Note:
If you have an optional preview monitor connected, you may need to disconnect it to
attach the camcorder or VCR that you want to record to. However, you may be able to
connect it to the output device as described later in this section.
Connecting Video Output
If your system is currently set up for video input, disconnect the audio and video cables
from the DVC 100 and the camcorder, VCR, or TV. You’ll need to use the cables to connect
video output. To connect your camcorder, VCR, or TV to the DVC 100 to output analog
video, follow these steps:
1.
Connect one end of the RCA (composite) video cable (yellow) or S-video cable (black)
to the corresponding Video Out connector on the back of the DVC 100.
Note:
S-Video provides higher quality video capture than composite video and should
be used if your camcorder, VCR, or TV has an S-Video connection.
2.
Connect the other end of the video cable to the corresponding Video In connector on
the camcorder, VCR, or TV.
Note:
Some analog camcorders and some older model TVs do not have Video In con-
nectors. Check each device’s documentation for specific details.
3.
Connect one end of the RCA audio cable (red and white) to the Audio Out connectors
on the back of the DVC 100.
4.
Connect the other end of the RCA audio cable to the Audio In connectors on the
camcorder, VCR, or TV.
Note:
If your device only suppor ts mono input, you need to use a Y-adapter.
TV
VHS
Back
Audio Out
Audio In
RCA Video Out
RCA Video In
S-Video Out
S-Video In
Or
DVC 100
(To AC Power)
