2
2.
BEFORE YOU BEGIN...
We recommend that you charge the pager fully before
using it for the first time. This can be done with the
cradle that comes with the pager.
Place the bottom end of the pager in the cradle and
make sure that the contact points (
) are properly
connected to the cradle.
Then plug the adapter into the wall socket. The
‘Charging’ pictogram will appear on the display. Once
the pager is fully charged, the ‘FULL’ pictogram will
appear on the display.
Charging
Battery fully charged
2.1
DAZATOOLS SOFTWARE FOR THE PAGER
DazaTools is a program that has been developed to enable optimal use of the pager. This software
makes it easy to operate and manage the pager. So we recommend that you use the functionality
provided by
the software as much as possible. This is also necessary so that further updates for the
pager can be installed. The software can be installed in three easy steps. You will need an internet
connection to download the software. For more information about the installation of DazaTools we
advise you to go to chapter 3: INSTALL THE SOFTWARE IN 3 EASY STEPS
