daytot neo+, User Manual

Page: 19 / 210

Daytot Neo+
– USER MANUAL
18
• Side lying – Position the infant in the centre of the Neo+
on their side with their bottom at the lowest point of the
‘U’(
! ). Mould the base cushion to provide support along the
infant’s back and behind their legs.
NB. To keep the infant’s airways clear, ensure there are no
beads behind the head causing undesired neck flexion.
10.4.7 Once the required position has been achieved, use the pump
to vacuum the base cushion to the desired level of firmness.
The surface should be firm but comfortable for the infant.
10.4.8 Detach the pump and close the cap.
10.4.9 Remove the infant and fold the cover back down over the
base cushion.
10.4.10 Place the infant back onto the product.
Before each session, the pump should be used to vacuum
the base cushion to the desired level of firmness.