(4)
Dayton Audio
®
Last Revised: 6/13/2022
SPECIFICATIONS:
Rated Power Output:
100 watts RMS into 4 ohms @ < 1.0% THD
Signal to Noise Ratio:
90 dB A-weighted
Maximum Input Sensitivity Voltage:
180 mV
Bass Boost:
Switchable, 6 dB @ 35 Hz
Low Pass Adjustment:
Variable 40 Hz – 200 Hz
Phase Adjustment:
Switched 0° or 180°
Dimensions:
8-1/16" H x 7-1/16" W x 2-1/8" D
Enclosure Cutout:
7" H x 6" W
Power Requirements:
115/230 VAC, 60 Hz/50 Hz, 100W
Stand-By Power Rating:
< 8.5W
Weight:
1.6 lbs.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
To reduce the risk of electric shock, never use this amplifi er when not installed into an enclosure. No user serviceable parts in-
side. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet. Refer servic-
ing to qualifi ed personnel. To reduce the risk of fi re and shock do not expose unit to rain or moisture. Clean only with dry cloth.
Unplug the unit during lightning storms or when unused for long periods of time. The unit should be operated in a well-ventilated
area. Minimum clearance is 2 inches from the amplifi er plate to allow proper heat dissipation. Do not install near any heat sourc-
es such as radiators, heat registers, stoves, or other apparatus which produce heat (including amplifi ers). Protect the power cord
from being stepped on or pinched, particularly at the plugs, convenience receptacles, and at the point where they exit the unit.
Only use attachments/accessories specifi ed by the manufacturer.
Note:
Unit is set at the factory for 115/120V operation. Be sure to change the fuse to a 2A rating before switching to 230/240V operation.
daytonaudio.com
tel + 937.743.8248
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
5-Year Limited Warranty
See daytonaudio.com for details