(4)
OPERATION
1.
Ensure that all your equipment is OFF, and lower all volume, gain, and level controls before making connections.
2.
You may connect a dynamic microphone, or line level audio device (mixing console, CD player, electronic keyboard, etc.)
to each of the INPUT 1 and INPUT 2 jacks, using the appropriate cables.
3.
Link additional powered speakers or outboard gear with the OUTPUT jack.
4.
Turn on your mixer or other audio devices, then turn on this amplifi er.
5.
Adjust levels of INPUT 1 and INPUT 2 (and OUTPUT selector, if applicable) to suit your needs. Use the volume control
on your Bluetooth device to control the level of Bluetooth playback.
SPECIFICATIONS
:
© Dayton Audio
®
Last Revised: 9/16/2016
daytonaudio.com
tel + 937.743.8248
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Amplifi er Type:
Class D
Low Frequency Power Rating:
600W RMS 4
�
/1kHz @ THD+N 1%
High Frequency Power Rating:
200W RMS 4
�
/8kHz @ THD+N 0.1%
Crossover Frequency:
3,000 Hz @ 12 dB/octave
Input Sensitivity:
LINE:
0 dBu
MIC:
-24 dBu
Dimensions:
15" L x 6-5/16" W x 2-3/4" D
Cutout Dimensions:
14" x 5-1/2"
Weight:
4.8 lbs.
Warranty Information
Dayton Audio products are warranted free from defects in material and workmanship for
5 years
from date of
purchase (see exceptions below). In the rare case of a product failure, please contact your place of purchase
or call our Customer Support Department at (937) 743-8248.
Warranty Limitations
There are no other warranties, either express or implied, that extend the foregoing, and there are no warranties
of merchantability or fi tness for any particular purpose. Dayton Audio is not responsible for any consequential
on inconsequential damage to any other unit or component or the cost for installation or extraction of any
component of the audio system, or for the improper use of products. This includes but is not limited to burnt
voice coils, overheating, bent frames, holes in the cone, or broken lead wires. Warranty does not apply to
misuse, abuse, neglect, accident, improper use, etc. Dayton Audio reserves the right to repair or replace the
products with either a new or factory refurbished unit.
Exception:
Dayton Audio HDMI Cables -- No registration, no questions asked LIFETIME warranty. Replacement
of Dayton Audio HDMI cables is with equal or better quality HDMI cables. Unassembled Kits - A 45-day return
policy applies to unassembled kits. Once assembly has been started or completed, kits are deemed used
and are nonreturnable for refund/exchange. This does not limit the manufacturers' warranty policies on any kit
component.
This warranty gives you specifi c legal rights and you may also have other rights that vary from state to state.
Non-Warranty Service:
If non-warranty service is required, the product may be sent to the Company for
repair/replacement, transportation prepaid, by calling (937) 743-8248 for details, complete instructions, and
service fee charges.
