10
Warranty
Dayton Audio products are warranted to be free of all defects in material and workmanship for 5 YEARS from the
date of purchase from an authorized Dayton Audio dealer. This warranty and all rights provided are limited to the
original owner and are non-transferable. Responsibility is limited to replacement or repair as set forth in this warranty
statement.
Should a product require warranty service during this period, Dayton Audio will repair or replace without charge, any
part or product proving defective in material or workmanship. All warranty repairs and service must be performed by
an authorized Dayton Audio technician or service facility. The use of non-authorized repair services renders this war-
ranty null and void, and any charges relating to non-authorized repair are the responsibility of the product owner.
All expenses (except return shipping costs) related to replacing or repairing a defective part or product under this
warranty shall be assumed by Dayton Audio. Dayton Audio reserves the right to replace defective product with a new
or factory reconditioned unit.
For more information and to register your new Dayton Audio device visit daytonaudio.com.
Specifications
Maximum Power Output (Peak) .................
100W x 2 @ 4 Ohm
RMS Power Output .....................................
65W RMS x2 @ 4 Ohm
Total Gain ....................................................
28 dB
THD+N .........................................................
<0.5% @ Maximum Rated Output
Frequency Response .................................
15 Hz – 20,000 Hz (±1 db)
Input Sensitivity ..........................................
1V
Channel Separation ....................................
58 dB
Minimum Speaker Impedance ...................
4 Ohm
Tone Controls – Bass/Treble .....................
±6 dB/oct at 200 Hz and 4,000 Hz
Signal To Noise Ratio .................................
75 dB
Digital Section
Digital Inputs ...............................................
SPDIF LPCM (up to 48 kHz 16 Bit)
PC-USB ........................................................
up to 192 kHz 32 Bit
Bluetooth .....................................................
5.0
General
Power Requirement
USA.................................................... 110V, 60 Hz
EC ...................................................... 220V, 50 Hz
Standby Power Consumption ...................
15W
Preamplifier Tubes .....................................
6F2 x 2, 6U1 x 2
Amplification ...............................................
Class A/B
Dimensions (W, H, D) .................................
10.6 x 6.6 x 11.5 in. (272 x 167 x 185 mm)
Weight ..........................................................
13.4 Lbs. / 6.08 kg
All Specifications are accurate at the time of printing.
Dayton audio reserved the right to make improvements without notice.
