CBT36K Assembly Manual
Page
68
of 89
12.2. C
ONNECT THE
B
EHRINGER
DCX2496
C
ROSSOVER TO THE
S
YSTEM
:
With all equipment off and referring to the following rear panel view of the DCX2496, connect your signal
source to the inputs of the crossover and then connect the crossover outputs to the power amplifiers.
12.2.1. Rear Panel View of Behringer DCX2496 with Connections:
Crossover outputs 1, 2, and 3 connect to the left system, and outputs 4, 5, and 6 connect to the right
system. Outputs 2 and 5 connect respectively to the left and right mid-bass power amplifiers. Outputs 3
and 4 connect respectively to the left and right tweeter power amplifiers. Optional left and right sub
woofers can connect respectively to outputs 1 and 6. Alternately, a mono sub woofer can connect to a
output 1, with appropriate changes to the crossover configuration to create a left-plus-right summed
output.
12.2.2. XLR to RCA Adapters:
To ease connections to single-ended amplifiers and signal sources, male and female XLR-to-RCA
adapters may be used. These can be ordered from Parts Express. The following shows these adapters
with Parts Express part numbers.
240-428
240-438
Once all these connections are made you are ready to test the system.
