Daytona P200T User Manual Download Page 25

Page: 25 / 60

Chapter 2 - Introduction

With Optos

Advance

practitioners can easily view, annotate and share patient records and digital ocular

scans. Detailed instructions can be found in the Optos

Advance

help files.

Physicians can use Optos

Advance

to view and manage their diagnostic data, videos and images.

Optos

Advance

software is used to:

Manage and display patient data

Store and review images and diagnostic data

Comparative image reviewing tools that allow images to be easily displayed and linked together for
simultaneous image viewing.

Automatic registration of image features. These registered points are used to align images that are
viewed together. You can also register image reference points manually.

Annotation and measurement tools that provide graphical mark-ups on the images. These mark-ups
are saved with the patient medical record.

Image measurements including distance and area measurements, and cup-to-disk ratio.

You can also use the

3D Wrap

view for patient education purposes. The

3D Wrap

view displays the

current image on a 3D model eye. You can run the animated "Fly-Through" or demonstrate refractive
errors and Intraocular Lenses.

You can run the review software from the following:

Double-click the desktop icon

2.6.5 Accessories and detachable parts

CAUTION

The use of accessories and cables other than those specified may result in degraded
electromagnetic compatibility of the system.

Depending on your device the following parts are applicable:

TABLE 2: List of parts

Part Number

Part

B14240

Eye piece (50mm)

B14294

Dust cap

A10791

Touch screen

M12954

Fabric cover

A10688

Optos

Advance

image server

1. 2.

A10798

Image server

C5884

Mains power cable

C5881

Network cable

1. Where the Optos

Advance

image server software is installed on a compatible virtual machine the physical server will

NOT

be supplied.

2. The supplied image server depends on your configuration.

Page 25 of 60

Part

Number:

G102748/11_ENG

2021

Optos

plc.

All

rights

reserved.

English

Summary of Contents for P200T
























































Search results

Summary of Contents for P200T

Reviews:

Related manuals for P200T

Brands by name

Popular brands

Daytona P200T, User Manual

Search results

Summary of Contents for P200T

Reviews:

Related manuals for P200T

Brands by name

Popular brands