22
iLM8 User Manual
the rotary encoder again will start to scroll through the choices for the next letter, or pressing ENTER
accepts the name.
DHCP: Configures iLM8 to look for a DHCP server for IP configuration. (Enabled or Disabled)
IP Address: If DHCP is set to disabled, allows you to enter the desired IP address manually. Press
ENTER while the cursor is over this field to go into data entry mode. Scroll through the available
numbers (0-255) and press ENTER to move to the next octet.
MAC Address: Displays iLM8’s MAC address if needed for firewalls or DHCP IP address assignments.
Diagnostics Menu
Diagnostics Menu Screen Display
Current Faults: Displays any error states that iLM8 may be in.
DSP Utilization: Shows the current load on iLM8’s DSP.
LED Test: Turns on all front-panel LED indicators to verify their functionality.
Meter Brightness: Allows adjustment of iLM8’s LED bar graph meters. (Default: 0)
Display Brightness: Allows adjustment of iLM8’s display output. (Default: Max)
Restore Settings: Returns all settings to their factory default values and reboots the unit. Network
settings will not be lost.
Reboot Unit: Performs a warm boot. No settings are erased or restored to defaults.
GPIO Test: A sub-menu that allows for GPIO function testing:
•
GPIO Output: Allows for testing of the internal signaling circuit within iLM8. The two fields
displayed represent each output, 1 and 2, respectively.
•
GPIO Input: Shows the current state of the GPIO inputs. The four fields of the displayed status
represent each input, 1-4, respectively.