27
Replacing Flat Tires
Replacing flat tire tubes is a more complicated and labour-intensive process with e-bikes
than it is with regular bicycles. It requires proper tools, more skill and more patience.The
front wheel is easier to service when changing a flat tire than the rear wheel, as the rear
wheel is connected to the hub motor and other mechanical parts.
Unless you are very familiar with the mechanical components of the rear motor,
attempting to change a flat rear tire may cause serious problems. Please contact your
Daymak dealer for specific instructions on how to remove your wheel and tires safely, and
how to replace the tubes. It may be easier – and safer - to have the tubes replaced by your
Daymak dealer.
The Motor
Do not service the motor yourself. Bring the e-bike to your Daymak dealer for service. The
motor in your e-bike is a highly complex and fine-tuned mechanism. Repairing it requires
significant expertise.
We suggest maintenance every 100 running hours or so.
The Chain
Ensure that the chain on your e-bike is well-oiled and lubricated. It is an important part of
your e-bike. As with any bicycle, it needs to be maintained if it is to function.
Bringing in your E-bike for Service
Do not attempt to service the electronic or mechanical parts of your e-bike unless you are
absolutely sure of what you are doing and have a solid understanding of electrical and
mechanical equipment. If your e-bike is not performing properly, disconnect the circuit
breaker and bring the e-bike to your local Daymak dealer.
Liability
Daymak will not be held responsible for damage or injuries resulting from errors resulting
from improperly serviced parts.
Summary of Contents for WILD GOOSE 60V
Page 1: ......
