THE DIFFERENCE IS NIGHT AND DAY.
™
• Printers can be damaged if dropped, compressed, punctured, bent, exposed to high
temperatures or placed in contact with liquid. Printers should be inspected before each
use for signs of damage.
o Printer should not be used if water or other liquid spills into the product as this
may result in electrocution, fire or other injury.
o Printer should not be used if exterior casing is warped, bent, punctured or bulging
as this may result in electrocution, fire or other injury.
• Do not press your hands or fingers against the cutter when removing printed paper or
loading/replacing roll paper due to the potential for injury.
• Cables can be damaged due to improper use, twisting, bending as well as over time and
should be inspected prior to each use for signs of damage.
o Do not use the power cable if it is damaged due to risk of fire or electrocution.
o Do not use the power plug if there is dust or foreign matter attached.
• In the following cases, immediately unplug and contact the CMC Service Center for advice:
o If the product emits smoke, a strange odor, or unusual noise.
o If water or other liquid spills into the product.
o If the product is too hot to touch or the case is deformed.
• Printer should be repaired by an authorized service provider only.
o Do not attempt to open printer casing or perform repairs as this may result in
damage to the printer or injury.
o Do not attempt to access or change printer battery as this can cause damage to
the battery which may result in overheating or injury.
• Printer should only be utilized with approved accessories.
o Use of incompatible power or USB cords may result in damage to the printer or
injury.
o Do not use the product with any power supply or volt¬age other than the ones
specified.
o Do not connect cables in ways other than those men¬tioned in the manual.
• Multiple, excessive loads on the power outlet (wall outlet) should not be used due to the
risk of fire.
• Printer and accessories should not be used in or near water or handled while hands are
wet due to risk of electrocution.
• The inside of the printer should only be accessed/touched as described in the user manual
to prevent electrocution or other injury.
WARNING: Failure to follow listed safety instructions may result in electric
shock, fire, death, injury or damage to the printer or other property. Read
all safety instructions before using the printer.
ENG-1