Daymak Inc. ·∙ 134 Oakdale Rd ·∙ Toronto, ON ·∙ 416-‐749-‐2324 ·∙ 1-‐866-‐379-‐7779 ·∙ www.daymak.com
Flashing fault code for PC controller
“Beeps”
0
00
0 000
0 00000
00 00
000 00
000 0000
0000 00
Other Codes
Flashing fault code for PC controller
Throttle Trip,
Ensure speed lever is stationary, switch power
(key) off then back on.
Speed Limit Control Trip
, Ensure connections to speed control
knob are intact, switch power (key) off then back on.
High Battery Voltage
, Measure the battery output voltage.
Low Battery Voltage/Controller Trip,
Charge battery, switch
power (key) on.
Solenoid Brake Trip,
Ensure manual brake lever at rear is in
run position (down), switch power (key) off then back on.
Throttle Trip,
Check parking brake, call for service
Motor Disconnected,
Ensure manual brake lever at rear is in
run position (down), switch power (key) off then back on.
Other flash code,
possible controller trip, switch power (key)
off then back on.
For clarification please call for service
.
1-‐866-‐379-‐7779
