23
Technical Data
This section provides you with the technical specifications for your Mobility Scooter.
The Motor and Wheel Assembly
The Boomerbuggy Split has a magnetic DC brushless motor on the rear wheel hub. This
type of motor has excellent low-end torque and high efficiency when working within its
range. Note that while the motor is very quiet, it does produce some noise.
The Controller
Daymak pioneered the development of intelligent component control in Mobility Scooters.
The Daymak Drive technology developed by Daymak is the brain of your Mobility Scooter.
It allows your Mobility Scooter to achieve faster acceleration, to climb steeper hills, and
to save energy.
The electronic controller is located under the seat assembly. This controller efficiently
regulates the speed and electronic functions of the bicycle. It allows for stepless speed
adjustment, shuts off the motor when the brakes are activated, has low voltage protection
and has fuses to prevent excess current from damaging the Mobility Scooter’s systems.
VeHICLE IDENTIFICATION NUMBER
(VIN)
Your unit comes with a Vehicle
Identifiation Number. You should write
this down and keep it somewhere safe
in case of theft of your unit. This is also
required for registering your warranty on
the warranty section of Daymak.com. To
find the VIN on your Boomerbuggy Split,
look underneat the frame near where
the front headlight is. You will need to
lift this up on its rear wheels to see it.
We recommend lifting with someone to
help you to avoid falling and damaging
the unit or hurting yourself.
