background image

7. TERMS OF WARRANTY

ii)   Standard Warranty

General Terms

If  equipment  failure  occurs  in  the  normal  course  of  service  having  been 

competently  installed  and  when  operating  within  its  specified  duty  limits 

warranty will be provided as follows:-

 

Up to one year - The item will be replaced or repaired at no charge.

  Over  1  year,  less  than  two  years  -  The  item  will  be  replaced  or 

repaired at a cost to the customer of 50% of the Davis & Shirtliff 

market price.

The warranty on equipment supplied or installed by others is conditional upon 

the  defective unit 

being promptly returned free to a Davis & Shirtliff 

ofce

 and collected thereafter when repaired. No element of site repair is 

included in the warranty and any site attendance costs will be payable in full at 

standard chargeout rates. Also proof of purchase including the purchase 

invoice must be provided for a warranty claim to be considered.

I)   General Liability 

•   In lieu of any warranty, condition or liability implied by law, the liability of 

Davis & Shirtliff (hereafter called the Company) in respect of any defect or 

failure  of  equipment  supplied 

is  limited  to  making  good  by

 

replacement  or  repair

 

(at  the  Company's  discretion)  defects  which 

under  proper  use  appear  therein  and  arise  solely  from  faulty  design, 

materials  or  workmanship  within  a  specified  period.  This  period 

commences 

immediately after the equipment has been delivered to 

the customer

 and at its termination all liability ceases. Also the warranty 

period will be assessed

 

on the basis of the date that the Company is 

informed of the failure.

Ÿ

This  warranty  applies  solely  to  equipment  supplied  and 

no  claim  for 

consequential damages,

 however arising, will be entertained. Also the 

warranty specifically excludes defects caused by fair wear and tear, the 

effects  of  careless  handling,  lack  of  maintenance,  faulty  installation, 

incompetence on the part of the equipment user, Acts of God or any other 

cause  beyond  the  Company's  reasonable  control.  Also,  any  repair  or 

attempt  at  repair  carried  out  by  any  other  party 

invalidates  all 

warranties.

19

Summary of Contents for SPS-190

























Reviews: