DAYLIFF Mower-P, Operating & Maintenance Manual

Page: 12 / 16

The blade is made of pressed steel for optimum
performance, it should be well sharpened about every 25
hours of work.
•
A small spindle (2 or 3mm of diameter) should be
introduced in the central hole of the blade: which
should stay horizontal. If the blade does not stay
horizontal, balance it by taking off some metal on the
lower side.
Use only Dayliff original spare parts. Any other spares parts
can lead to serious damage to the lawn mower and void the
warranty.
WARNING
• To remove the blade, unscrew it, check the blade
support and change all spare parts if they are worn out
or damaged.
• To sharpen the blade, place it in a vice and file the
cutting edge evenly.
• When reassembling the blade, make sure that the
cutting edges face in the direction of the engine’s
rotation. The blade screw must be tightened to (37Nm)
with an appropriate tool.
9
Fig 5
Fig 6