4
3. USE AND MAINTENANCE
Ÿ
Upon opening, check that contents in the carton are as specified in the packing list.
Ÿ
Assemble the frame as shown in the Figure 1 and ensure that the equipment is
complete.
Ÿ
Working conditions: Altitude below 3500m; max. liquid temperature +40
℃
;
Environmental humidity below 98%
Ÿ
Before adding engine fuel add oil up to the maximum oil level on the dipstick. Do not
overfill (Fig 2). Always check the oil level before use and top up if it is below the
minimum oil level (Fig 3). When changing the oil remove the oil filler cap/dipstick, the
drain bolt and sealing washer and discharge to waste. Ensure to change after the first
5 hours and 50 hours thereafter.
Fig 1
Fig 2
Oil drain bolt
The recoil force will arise due to the water stream ejecting from
the spray lance. The gun and spray lance should be held firmly .
CAUTION
CAUTION
Do not change any safety devices.
Fig 3
Ensure engine is switched off before performing any
maintenance or service.
CAUTION
Summary of Contents for DPW
Page 1: ...DPW HIGH PRESSURE WASHER Installation Operating Manual...
Page 2: ......
