10
Technical data
Voltage:
5 V
Frequency Response:
30 Hz-18 kHz
Sensitivity:
-34 dB ±30%
Sensitivity:
-34 dB ±2 Db
Equivalent noise level:
16 dBA
S/N Ratio:
78 dB
Incl. USB cable 1.3 meter
Polar pattern:
Uni-directional
Can be adjusted 360° horizontally
Can be rotated 180° angle
Volume control
Volume up: clockwise
Volume down: counterclockwise
Mute: Counterclockwise until endpoint
Keep the volume all the way down when
plugged the mic into USB port, and gradually
turn volume up for the perfect eff ect during
the use.
STREAMING MICROPHONE
Real time monitor
The mic is equipped with a 3.5 mm earphone
output, which allows to monitor input to mic
without delay.
To use this function you need to insert the
headphone jack into the earphone output.
Remember to change the output of your
computer if you want to use speakers at
the same time as you are doing to real time
monitor.
Computer setup
Apple MAC OS
Plug the free end of the provided USB cable
into the USB port on your computer.
Your computer will automatically recognize
the USB device and install a driver.
1. To select the MICUSB1 as your audio input,
fi rst open your System Preferences.
2. Next, click Sound to display Sound
Preference pane.
3. Click the Input tab and select MICUSB1 as
the device for sound input.
Notice: If you want to monitor your voice
when using Macbook, you must turn on
any recording software fi rst (Audacity, for
example). Make sure to click “Software Play
(on)”, then click the Record button to begin,
otherwise you cannot hear any sound when
you speak into the mic. If the computer is
not able to identify this USB device, please
restart the computer and replug the mic into
another USB port.
�������
�������������
�����������
