54
• The cyclone � lter can be taken apart to
make it easier to clean: Twist the inner
cyclone insert a little in order to release it,
and then remove it.
• Tap out all the parts over a dustbin and
brush off the loose dirt.
• You can wipe down the parts of the
cyclone � lter and the dust container with
a damp cloth.
• If necessary, thoroughly rinse the foam � lter and the � lter holder with clear, lukewarm
water. CAUTION: Do not use any cleaning agent! Never wash in the dishwasher or in the
washing machine! Then shake off any excess water and allow the � lter and � lter holder to
dry completely in the air before reinserting them.
• Once all parts are dry, � rst assemble the cyclone � lter. There are arrows marked on both
parts of the cyclone � lter. Assemble the parts so that both arrows point towards one
another and then twist them � rmly together.
• Place the dry foam � lter into the � lter holder and then place this onto the cyclone � lter.
CAUTION: Under no circumstances should you assemble parts of the device that are still
damp!
• Place the cyclone � lter into the dust container. Make sure that it is correctly recessed and
can no longer be rotated.
• Place the lid onto the dust container and twist it shut.
• Attach the dust container to the motor unit.
Cleaning the motor unit, nozzles and telescopic tube
• If necessary, clean the motor unit, nozzles and the telescopic tube using a slightly damp,
soft cloth. Dry them with a soft cloth.
• Remove hair and � uff from the nozzles at regular intervals.
Storage
• Store the device in a cool, dry place out of the reach of children and animals.
