DAXYS WOLF, User Manual

Page: 20 / 28

18
OPERATING YOUR BIKE:
Display, Buttons, Power on, gears, brakes etc.
1. Display function
Speed display, Power indicator, Failure indication, Odograph, Trip distance.
2. Control and setting functions
Power switch control, Wheel diameter setting, Maximum speed setting, Idle automatic sleep setting,
Back-light brightness setting, Voltage rating setting etc.
Set up
P01: Back-light brightness Settings: level 1 darkest, level 3 brightest; (Default: 002)
P02: Unit mileage Settings: 0 - KM; 1 - MILE (Default 000)
P03: Voltage level Settings: 24V, 36V, 48V, 60V (Default 36V)
P04: Display sleep time Settings: 0, no sleep; Numbers indicate time until sleep, in minutes, range: 1-60; (Default 10)
P05: Assist gear Settings: there are 3 possible gears (Default: 000)
P06: Wheel diameter Unit: inch value: 4.9” - 30.4”; precision: 0.1 (Default: 026)
*This parameter is related to the displayed speed and needs to be entered correctly!
P07: Speed gauge magnetic discs Range: 1-100 (Default: 001)
P08: The speed limit: Range: 0-25 km/h
Communication status (Speed control): drive speed remains at set value, error : ± 1km/h
Note: The value here is based on kilometers. When the unit is set to convert from kilometers to miles, the speed value of the display
interface will be automatically converted to the correct value of miles, however, the speed limit data set at this menu under the mile interface are not
converted, which is inconsistent with the actual speed limit value of the mile shown.
Note: Menu items P09-P15 are only available in COM mode
P09: Starting speed Settings 0: Zero start 1: non-zero start (Default: 000)
P10: Drive mode Settings 0 :Power-assisted drive *(determines how much power is output).
1: Electric drive *(the automatic assist is invalidated by turning the acceleration lever)
2: Both the power-assisted drive and the electric drive are active simultaneously
*(the electric drive is invalid under zero start condition).
P11: Assist sensitivity Settings range: 1-24; (Default: 003)
P12: Assisted start intensity Settings range: 0-5; (Default: 003)
P13: Magnetic disc booster Settings range:5,8,12 (Default: 012)
P14: Controller current limit value Settings: 1-20A (Default: 18A)
P15: Under-voltage value point Default: 029
P16: Reset ODO to 0 Settings: long press up key for 5 seconds to reset
P17: Walk mode on and off Settings, 0: Start walk mode 1: End walk mode
P18: Display speed ratio adjustment range: Settings: 50 % ~ 150 % (Default 100)
P19: Set gear 0, Settings: 0: includes PAS 0, 1: does not include PAS 0 (Default 0)
P20:0 Protocol 2; Do not set