DAXYS LYNX User Manual Download Page 4

2

RIDING INTRODUCTION

Do not 

use the product before carefully reading the instructions and understanding the performance of the product; 

Before cycling, check whether the brakes work. When braking, please brake rear first and then front. Pay attention to 
the brake tightness. If the brake is too loose, use an Allen wrench to tighten it. Pay attention to increase the braking 
distance when riding in rain and snow. Applicable age: 16 ~ 65 years old. Please wear safety helmets and obey the 
traffic rules when cycling. It is not allowed to drive in motor lanes and roads with more pedestrians. Please check 
the tyre pressure before cycling. The recommended tyre pressure is 32- 40(max) PSI.  When using the motor, pay 
attention not to hit it vigorously and keep the rotating shaft lubricated. The maximum load is 100kg. 

SAFETY INFORMATION:

ALWAYS WEAR A HELMET AND SAFETY 
EQUIPMENT

Helmets significantly reduce the number and severity of 
head injuries. Always wear a helmet that complies with 
your state laws when riding your eBike. Make yourself 
more visible by wearing bright reflective clothing. Keep 
your reflectors clean and properly aligned. Use head 
and tail lights in reduced lighting conditions. Wear sturdy 
shoes and eye protection. Also check your state laws 
concerning other protective gear that may be required 
when riding your eBike.          

KNOW YOUR EBIKE

Your new eBike incorporates many fea tures and 
functions that you may be unfamiliar with. Read this 
manual thoroughly to understand how those features 
enhance your riding pleasure and safety.  

RIDE WITHIN YOUR LIMITS

This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience 
and knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety. 
Children should be supervised to ensure
Take it slow until you are familiar with the riding con ditions, as traction can 
be greatly reduced and brakes become less effective. Never ride faster than 
condi tions warrant or beyond your riding abilities. Remem ber that fatigue, and 
inattention can significantly reduce your ability to make good judgments and 
ride safely. 

KEEP YOUR EBIKE IN SAFE CONDITIONS

For your safety and enjoyment, and to ensure a long life for your eBike, 
inspect and maintain your eBike regularly. 
Follow the inspection and maintenance guidelines throughout this manual. 
Check critical safety equip ment before each and every ride.

Summary of Contents for LYNX





























Reviews: