background image

19

DAXYS GRIZZLY - USER MANUAL

BATTERY AND CHARGER INFORMATION:

GOOD PRACTICES

Control the temperature

Avoid charging in extreme temperatures that are outside normal comfort range.
If your battery does get very hot or cold, allow it to come to room temperature before you plug in the charger. Batteries get warm even during normal 
use - wait a few minutes post-ride before you start charging.

Use the right charger

For best performance, use the original charger that was supplied with your eBike. If you must use a different charger (for example: if the original 
charger is lost or damaged and replacements are no longer available) check carefully to ensure a 100% match before you charge.

Don’t take it to 0%

Lithium-Ion batteries have the longest service life when kept in the middle of their capacity. Sometimes, draining is unavoidable, but when possible, 
top off before 0%. Use the display or the battery indicator on your eBike’s battery to monitor the charge level.

Don’t overcharge

You can extend the lifespan of your lithium-ion batteries by charging to 80%, when possible. 
Epic ride coming up tomorrow? Go ahead and charge to 100%. It’s totally OK and is an expected, normal use of your battery. 

Keep it dry

Never charge in a damp or wet environment. If your eBike was ridden in the rain, ensure every component is completely dry before you charge. 

Don’t pressure wash your battery, and never submerge it.

Give it some room

Both chargers and batteries can get warm during use. Make sure that any vents on the charger aren’t blocked and ensure that air can circulate 

around all the components. Place chargers on a hard surfaces only.

Don’t use an extension cord

Extension cords adds resistance. While extension cords can be convenient, some chargers may work poorly, or not at all, when plugged into exten-
sion cords. Plug your eBike charger directly into a wall outlet instead for best results. If required to use an extension cord, use the shortest length 
possible, and always check the specs to ensure it can handle your charger’s requirements.

Storage and Warnings

If the battery will not be used for an extended period of time store in a cool, dry place, and charge it for 5 hours every month. 
Please use the original special charger for charging, not more than 6 hours, and the charging current shall not exceed 2 A (amperes).
If you notice unusual sounds, smells or temperature variations coming from the charger or the battery, unplug charger immediately and contact 
customer service. 
Improper use of the battery will damage the battery and may cause fires or explosions.
Do not disassemble or alter the battery or battery charger.
Do no place the battery near fire or corrosive substances. 
Protect the battery / charger from exposure to liquids and do not use when damp.
Do not expose the battery / charger to extreme conditions.
Do not operate if damaged.
Recharge the battery only with the charger specified by manufacturer.
Do not use the battery / charger for any other purposes except the intended ones.

Summary of Contents for GRIZZLY































Reviews: