22
6.4.2. RADIATOR TEMPERATURE SETTING
While
or
symbols are seen at LCD Display, (when device is operating for
radiato system) radiator heating setting can be made between
35
o
C and 80
o
C by
pressing
or
buttons. While radiator heating setting is made,
“Water Temp”
expression fizzle out, setting temperature starts to blink. While the device is
operating for heating tap water, hot water flow must be stopped for setting radiator
heating. In case of operation mode is set as tap water heatingfor changing radiator
heating, it is needed to take operation mode to radiator heating. At the end of the
process, device must be taken to previous operation mode. (Check 6.4.8)
After 2 sec later setting completed, device operation temperature and
“Water
Temp
” expression are seen at the LCD. Reaching seeting temperature of device
may take time. After tap water heating is completed, radiator heating does not start
immediately, radiator heatinf starts after pump operates for a while for temperature
balance.
6.4.3. Tap Water Temperature Setting
This setting can be made for models UKDAX-xxEDT and UKDAX-xxEDM which
provide hot water. With UKDAX-xxETT, UKDAX-xxETM and UKDAX-xxETP hot
water can provide as external.