Safety
General Safety Procedures
Training Requirements
●
The owner of this machine is solely responsible for properly training the operators.
●
The owner/operator is solely responsible for the operations of this machine and prevention of
accidents or injury occurring to him/herself, other people or property.
●
Do not allow operation or service of this unit by children or untrained personnel. Local laws or
regulations may restrict the age of the operator.
●
Before operating this machine, read the operator’s manual and understand it’s contents.
●
Read and understand all safety information.
●
Learn and understand the use of all controls.
●
Never stand in a location where the machine has a possibility of falling or pinching the operator or
other people.
Personal Protective Equipment Requirements
It is the responsibility of the owner to be sure that the operators use the proper personal protective
Equipment while operating the machine. Required personal protective equipment includes, but
is not limited to the following list.
●
Safety glasses while operating the machine to prevent eye injury.
●
Closed toe shoes.
●
Long pants.
●
When operating in dusty conditions, it is recommended that a respirator should be worn.
Operation Safety
●
Inspect machine before operation. Repair or replace any damaged, worn or missing parts. Be sure
guards and shields are in proper working condition and are secured in place. Make any necessary
adjustments before operating the machine.
●
Some pictures in this manual may show shields or covers opened or removed in order to clearly
illustrate some instructions. Under no circumstance should the machine be operated without these
devices in place.
●
Alterations or modifications to this machine can reduce safety and could cause damage to the
machine and/or injury to the operator and others. Do not alter any safety devices or operate with
shields or covers removed.
●
Before each use, verify that all controls function properly and inspect all safety devices. Do not
operate if controls or safety devices are not in proper working order.
●
Observe and follow all safety decals.
●
Ensure machine latches and locks are all in place and functioning correctly.
6