Step 2
(unboxing cont.)
Once the Mulch Mate is uncrated, it is time to remove the
install package/box inside the Mulch Mate along with the dual
pivot hinge that is located inside the cabinet of the Mulch Mate.
Once these items are removed, open the long cardboard box. It
will have the serial number on the outside of the box along with
the transponder number to your wireless remote that is in a
sealed bag inside the box. Remove the eyebolt(s) that the boxes
were strapped to and replace it with a 5/16-18 x ⅝” long carriage
bolt and flange nut just like the bolts to the left and right of it.
Step 3
(installing the dual pivot hinge)
At this point, it is time to install all the hardware needed to install the dual pivot
hinge onto your Mulch Mate. Start by installing the four sleeve bushings using a soft
rubber mallet (fig 1).
4
3/24/2022 Rev 07
