Dawson 4000M2, Operator'S Instructions/Spare Parts List

Page: 38 / 46

MACHINE TYPE
EMV550 EMV450 EMV400 EMV300 EMV70 VPC EMD140 EMD70
SADDLE ASSEMBLY
Sandwich Mount Condition
Buffer Stop Condition
Top Swivel Condition
Max gap 1mm
(ideally no play)
Greased
Remarks:
CLAMP ASSEMBLY
Serial No.
Static Jaw Condition
Moving Jaw Condition
Greased
Chain Clamp (Serial No. )
Lifting Chain (Serial No. )
Coupler (Serial No. )
Remarks:
PRE-DELIVERY INSPECTION SHEET
EMV’S, VPC’S AND EMD’S
Serial No:
Photo taken before dispatch:
ADAPTOR BRACKET / QUICK HITCH ASSEMBLY
Adaptor Pin Diameter Length
Bushes List
Additional Spares Supplied
GEARBOX ASSEMBLY
Oil Level
Leaks
(Visual)
Case Breather Valve
Motor Blow off Valve
General Condition
Remarks:
HOSES
Hoses Condition
Spring Guard Condition
Running Leaks
Fittings
Additional Spares Supplied
Remarks:
Inspection Time / Date: Inspector Name:
Stand:
Remarks:
VIBRO RUNNING CHECKS
Cycle Clamp x5 to Check Function
Close Clamp Stop Vibro & Leave for 5 mins (CLAMP MUST STAY CLOSED)
Run Vibro and Check for External Leaks Hoses
Fittings
Motor Blow Off Valve
QRC
Maximum gap allowed due to wear.(see photo)
Check using a crowbar to force apart assembly, then
insert a feeler gauge at least 20mm into gap, if more
than 1mm change lifting bolt and nut immediately and
check other components replacing as required.