SAVE THESE INSTRUCTIONS. THIS PRODUCT
FOR HOUSEHOLD USE ONLY.
The alert symbols displayed above point to important
safety information to make you aware of potential
hazards that can cause serious injury or death. Please
pay special attention to the information following these
alerts and warnings. Failure to comply with these
instructions can result in property damage, serious
injury of death.
ELECTRICAL SUPPLY
THIS APPLIANCE MUST BE EARTHED, In the event of a
malfunction, earthing provides a path of least
resistance for the electrical current, thus reducing the
risk of electrical shock.
This dispenser is rated at 120VATTS, 50/60 Hz,
maximum 10.9AMPS and should be connected to a
main distribution board or consumer unit.
Before you begin connecting the electrical supply, you
should be thoroughly familiar with electrical power and
procedures. If you are not, consult an electrician.
IS THE DISPENSER EARTHED?
THIS APPLIANCE MUST BE EARTHED.
In the event of malfunction or breakdown, earthing
reduces the risk of shock. This dispenser must be
connected to an earthed, metal, permanent wiring
conductor and connected to the equipment earthing
terminal or lead on the dispenser.
HOT WATER CONCEPT
Unlike a household water heater, this dispenser tank is
not pressurized for safety reasons. For a conventional
household water heater, the faucet valve is placed after
the heater tank resulting in a pressurized tank. For a
hot water dispenser, the faucet valve is placed before
the tank, creating an "open vent" style faucet and
consequently no pressure is built up inside the tank.
Operating inlet water pressure requirements :
140kPa (20psi) Min and 1000 kPa (150psi) Max
2
