background image

 

 

 

 

 

 

 

(1) 

 

 

 

 

 

 

 

 

Owner's Manual

 

 

Thank You for purchasing a  S

TAR

LOOK

-

 D-instrument. 

 

This manual covers the operation and maintenance of the  S

TAR

LOOK

-

 D

instrument. 

 

All information in this publication is based on the latest product information available at the 

time of printing. 

 

Emitor AB reserves the right to make changes at any time without notice and without incurring 

any obligation. 

 

No part of this publication may be reproduced without written permission. 

 

This manual should be considered a permanent part of the instrument and should remain with 

it if it is resold. 

If a problem should arise, or if You have any questions about the instrument, consult an 

DAWNco

 

! Notice !

 

 

Operating a S

TAR

LOOK

-

 D

 

instrument requires special skills. Please read this Owner's 

Manual thoroughly before operating the instrument. 

 

 

 

Contents: 

 

I.  Description. 
II. Operation. 
      

A. Unpacking. 
B. Connection. 
C. Knob and control-button. 
D. Information: 

III. Functions: 

1.

 

Picture. 

2.

 

Digital. 

3.

 

Full spectrum – Max zoom in.  

4.

 

Attenuation. 

5.

 

DiSEqC-control 

6.

 

Setup. 

7.

 

Beeper. 

8.

 

Special. 

9.

 

Memory. 

IV. Maintenance. 
V.  Technical specification. 

 

 

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

Summary of Contents for STARLOOK- D

















Reviews: