4096-356
DAWNco satellite products 2.4M Az/El TRUSS MOUNT
16
NOTE: At least three persons are required for the installation of the antenna on
the mast. After the reflector is positioned on the canister, two can steady the
reflector while the other secures it with the 1" bolt.
3.2 CANISTER & ELEVATION ASSEMBLY
STEP 1:
STEP 2:
STEP3:
Assemble the elevation rod by running
5/8" nut (item 13) well up onto the
elevation rod (item 3). Slip the
elevation
block ( item 2) onto the rod and secure
with another 5/8" nut.
Insert each square head bolt (item 4 )
into the canister, only a few turns, so
that the bolts do not extend into the
canister. Position the canister on the
mast and insure that it is seated all the
way down on the mast pipe and that it
can rotate freely.
Canister
[ 4 ]
6 PL
Mast
Place the elevation rod assembly in
between the two tabs on the canister
and secure with 3/8" hardware ( items
5, 7, 8 ).
[ 3 ]
[ 13 ]
[ 2 ]
[ 13 ]
[ 5, 7, 8 ]
[ 5, 7, 8 ]
