Reflex Operating System
©2018 Dawn Equipment Company, Inc. 370 N Cross Sycamore, IL 60178 USA
www.dawnequipment.com
Toll Free: 800.554.0007 Fax:815.899.3663
MANUAL MODE (14.4)
By pressing the
Manual Mode
tab to the left, you will
switch from targeting a consistent gauge wheel load,
to targeting a selected amount of hydraulic pressure
for all units. Rows will turn orange.
By pressing the
Gauge Wheel Load
tab, you will
switch over to displaying the Applied Down Pressure
for each row. To update the targeted pressure, select
the psi, and touch the orange tab to program.
INDIVIDUAL ROW SETTINGS (14.5)
Individual rows may be set up to your specific settings
as desired. Whether you want/need to operate rows in
manual mode, or have different GWL targets in
automatic mode.
Tap on any row number on the Global Status screen
to access the individual row’s settings. Any changes
made to Gauge Wheel Load (in automatic mode) or
Target Down Pressure (in manual mode) will apply to
only the individual row controller.
If you want an individual row’s settings to remain
unchanged while being able to update settings for all
other rows on the Global Status screen, select “
Global
commands locked
out
tab”. Press again to undo
lockout. Locked out rows will appear in a grey box on
the Global Status screen.
