background image

6

OPERATION

 _______________________________

Whisking

Notes

  You can use the balloon whisk     for  

whipping cream and beating eggs.

  Never use more than 4 egg whites or 400 ml 

cream.

Put the balloon whisk     onto the whisk holder 

F

 until it clicks into place.

Connect the base unit       to the whisk holder 

F

 by putting the whisk holder onto the base 

unit. Turn the base unit to the left. Make sure 
that the whisk holder is securely attached into 
the base unit.

Put the ingredients that you would like to 
process in the measuring beaker     or in any  
other similar bowl.

Connect the power plug      into the wall 
socket.

Hold the balloon whisk      into the mixture to 
be processed.

Press and hold the On/O

ff

 button level I    or  

II 

D

Move the appliance slowly up and down and 
in circles to whisk the ingredients. 

Release the On/O

ff

 button level I 

      or II 

 

when you finish the process and disconnect 
the power plug from the wall socket.

Remove the mixture from the measuring 
beaker   .

10 

Disassemble the base unit     from the whisk

E

holder   by turning the base unit to the right 
and pulling it o

ff

.

Note

  Do not operate the appliance for longer than 

3 minutes at a time.

  Do not overfill the measuring beaker     , or  

the similar bowl to prevent the mixture from 
overflowing. Smaller amounts can be processed 
easier.

  If you would like to use the balloon whisk 

directly in the cooking pot, first take the 
cooking pot out o

ff

 the stove to prevent the 

balloon whisk from overheating.

Caution

  Make sure that you do not drill into electrical 

lines or water pipes!

2

 Secure the wall mounting attachment     to the  

wall using the supplied screws and dowels.

3

 You can place the base unit     on the wall  

mounting attachment    . 

M

Note

The base unit can also be hung on a hook with 
the hanging loop    . 

A

INFORMATION

 ____________________________

 

You can put your appliance to a practical place 
by mounting the wall mounting attachment.

1

 Hold the wall mounting attachment     in  

the desired position on the wall. Mark the 
two drill holes. Drill the holes and insert the 
supplied dowels.

Installing 

the wall mounting

attachment 

H

H

E

I

B

H

C

-

The appliance starts operating.

M

C

D

I

F

I

M

E

Summary of Contents for DWHB 875











Reviews: